EOS sP (70-160 toneladas)


technical moulding TECHNICAL MOULDING


automotive icon AUTOMOTIVE



technology-lrs-icon technology-multi-component-icon PVC Thermoset FOAM MICROCELLULAR MOULDING® Gas Injection


technology-automatcion-icon Robots




Accurate • Versatile • Compact

Features the TACTUS™ Controller

EOS sP injection moulding machine side view

The EOS sP Series are two-platen clamp, servo-pump, hydraulic powered injection moulding machines available in 70-, 110- and 160-tonne models. An extremely compact footprint with very generous part drop area is achieved through the cantilever clamping unit design combined with a twin ram injection unit which features a hydraulic reciprocating screw. Injection capacities range from 69g to 600g (PS) across the line. EOS machines are equipped as standard with:

  • TACTUS™ Touchscreen PC with Powerlink, user-friendly interface with full range of control parameters
  • Highly efficient servo-motor driven gear pump system
  • Innovative cantilever clamping unit with very generous tie bar spacing to accommodate larger moulds, and a moving platen that rides on linear bearings, providing excellent parallelism between the platens and ensuring cleanliness in the moulding area due to the absence of lubrication oil
  • Robust twin cylinder injection unit
  • Extremely compact footprint
  • AMICO wireless remote service access



EOS sP maquinas de inyeccion



  • Cantilever two-platen clamping unit
  • Euromap or SPI platen configuration
  • Hardened tie bars
  • Linear bearings for moving platen guidance and support
  • Three‐stage mould closing speed profile
  • Three‐stage mould opening speed profile
  • Mould closing and opening stages governed through closed loop with proportional control valve
  • Digital reading of moving platen position displayed on operator interface
  • Digital reading of clamping force displayed on operator interface
  • Two‐stage ejection speed profile
  • Ejection force control
  • Digital reading of ejector position given on operator interface
  • Repeated ejection with stroke and speed control
  • Ejector return signal



  • Injection unit with two hydraulic cylinders
  • Injection unit sliding on linear bearings
  • General purpose screw profile, suitable for most types of thermoplastic materials
  • Bimetallic plasticising cylinder
  • Nitrided screw
  • Ceramic heater bands
  • Alarm threshold for set temperature range
  • Injection speed and pressure profiles
  • Switch to holding pressure triggered by screw position, hydraulic pressure or time
  • Digital reading of screw position displayed on operator interface
  • Adjustable screw rotation speed profile
  • Screw rotation delay
  • Adjustable back‐pressure profile
  • Digital reading of back‐pressure displayed on operator interface
  • Decompression before and after screw recovery
  • Intrusion moulding program
  • Auto purge program
  • Stainless steel hopper



  • Single fixed displacement gear pump with servo motor and Baumuller drive with P/Q control
  • Digital reading of hydraulic circuit pressure displayed on operator interface
  • Monitoring of oil level, temperature and filter blockage
  • Oil temperature control system
  • Automatic cooling water shut-off valve
  • Oil preheating program
  • Oil filter in pump delivery and/or return circuit
  • Oil cooling heat exchanger
  • Oil gauge



  • Servo drive
  • Remote starter with overload cutout
  • Interlocked main switch to prevent electrical cabinet from being opened when press is energised
  • Fuses and static relays that control plasticising cylinder heating
  • Fan for air circulation in electrical cabinet
  • LED indicators on solenoid valves
  • Fully labelled electrical circuits
  • Conforms to Euromap, UL, and CSA electrical standards



  • Flow meter with adjustable independent circuits with water temperature and flow rate indication (One circuit is used for throat cooling with the remaining circuits available for mould cooling)



  • Part discharge outlet accessible on three sides
  • Sound insulated motor‐pump assembly housing
  • Lubricating oil recovery trough
  • Anti-vibration mounting pad holes



  • Constructed in compliance to essential requirements of Machinery Directive 2006/42/CE and subsequent amendments
  • All models CE certified by an European certification organisation
  • Devices comply to European Standard EN 201 and ANSI/SPI B151.1-2007
  • Rear mould protection with double interlocking device and pump drive motor shutdown
  • Monitoring of correct operation of hydraulic and electric safety devices
  • Interlocked nozzle purge guard



  • TACTUS™ touchscreen controller with Powerlink and resistive technology (can be used with gloves)
  • 21.5″ Colour TFT LC display with 1920×1080 resolution
  • IP54 protection
  • Unique integrated grip strip allows easy hand positioning
  • Front mounted USB socket
  • Favourites function
  • Cycle optimiser function
  • Configurable function key layout
  • Free programming capability for special cycle sequencing
  • Auto-calibration program for all input and output channels
  • Dedicated display area for viewing of main process parameters
  • Password and data input lock-out key
  • Multi-language capability
  • Hour counter
  • Perpetual clock
  • Page with press technical specifications
  • Cycle times with sequence alarm page
  • Three-stage mould closing with both speed and position adjustment
  • Two pressures during mould closing with fully adjustable mould safety feature
  • Mould pre‐feed
  • Closed mould feedback signal
  • Three-stage mould opening with both speed and position adjustment
  • Closed loop control of mould opening position
  • Cooling timer
  • Screw and mould maintenance page
  • Lubrication cycles
  • Clamping force readout
  • Multi-stroke ejector
  • Two ejection speed steps
  • Partial return stroke during repeated ejection
  • Adjustable ejector output and return pressure
  • Interlocking of ejector, air blow and core pulling
  • Closed loop speed control for injection stage
  • Closed loop pressure control for holding stage
  • 10-Stage injection speed control with selectable number of stages
  • Switching to holding pressure by time, hydraulic pressure or screw position
  • 10-Stage holding pressure control with selectable number of stages
  • Screw decompression before and after screw recovery
  • Five-stage closed loop screw rotation speed control with selectable number of stages
  • Five-stage closed loop back pressure control with selectable number of stages
  • Self‐adjusting shot size control system
  • Speed and pressure for control for carriage movements
  • Program to automatically calculate the required shot size according to material type and part weight
  • Barrel temperature PID control
  • Self-tuning program for cylinder temperature control
  • Weekly clock to set the time the cylinder turns on and shuts off and three additional outlets
  • Quality control (20 parameters) with direct display of the last 200 cycles in graphic form
  • Production control
  • High resolution graphics for real pressures, screw speed, screw position and cavity pressure
  • Sample curve for each data item can be saved in graph
  • Zoom
  • Set points displayed
  • Fill Index
  • Memo page
  • Interface for graphic or other types of printers
  • Alarm page showing current faults with description and instructions on how to reset
  • Real machine status (analog inputs and outputs) at time fault occurred
  • Events history with possibility to view last 200 events regarding faults, shutdowns, and changes made to parameters
  • Diagnostics page for digital inputs, analog inputs and analog outputs
  • Self‐adjusting functions for all analog inputs and outputs
  • Internal archive for more than 500 moulds
  • Parallel interface and USB port for printer

Tactus Controller 3 Screen Shots website

Servo Pump System


CANBIO-ST-SERVO-PUMP-SYSTEM-2The EOS sP is powered by a servo motor driven gear pump system, using the very latest technology from renowned component suppliers such as Rexroth and Baumuller. The benefits of this system are many and offer a much greater overall efficiency, the most important of which are:

  • Improved process control reduces reject levels
  • Lower power consumption results in a lower cooling requirement
  • Much less noise for a better working environment
  • Longer oil life, longer lasting hydraulic components and reduced maintenance

These performance enhancements combine to produce a more profitable moulding process for the owner. This arrangement, coupled with special energy optimising software from Negri Bossi, provides the user with excellent energy efficiency, reduced power consumption, and a more profitable manufacturing process.

CANBIO ST Energy Consumption Chart 1

An analysis of energy consumption during the various phases of a typical moulding cycle shows that the servo pump solution produces a superior result, when compared to more traditional hydraulic power systems. The following is one example showing how the EOS sP provides the customer with important savings in energy usage.

CANBIO ST Energy Consumption Chart 2

Noise levels are much reduced, producing an improved working environment.



  • Core Pull MP/FP
  • Air Blast MP/FP
  • Proportional Valve for Hydraulic Ejection
  • E12 Adapter Plug
  • E67 Robot Interface
  • Special Screw (Wear Resistant, Corrosion Resistant, Mixing, Barrier, Low Compression, etc.)
  • Special Barrel (Corrosion Resistant, High Wear Resistant)
  • Barrel Liner
  • Special Tip Design
  • Extended Nozzle Body
  • Additional Nozzle Zone
  • Mould Valve Gate Hydraulic
  • Mould Valve Gate Pneumatic
  • Hydraulic Shut-Off Nozzle – Pin
  • Hydraulic Shut-Off Nozzle – Bolt
  • Transformer(s)
  • Integrated Hot Runner
  • Mould Pressure Transducer Interface
  • Gas Injection Interface
  • Data Logging Interface
  • RJG Process Monitoring Interface
  • Special Paint
  • Additional Flowmeters
  • Closed Loop Feed Throat Cooling
  • 100 mm Reduced Mould Height
  • PVC Kit
  • Thermoset Kit
  • LSR Kit
  • FMC® Kit
  • Power Outlet(s)
  • Colour Feed Signal
  • Photocell
  • Directional Parts Chute
  • Magnetic Platens
  • Hydraulic Mould Clamps
  • Rotary Table
  • AMICO System Services


EOS sP END MARKET APPLICATIONS EOS-Secondary-Product-Collage-500x250px

  • General Small Size Parts
  • Medical
  • Automotive
  • Construction
  • Industrial
  • Appliance
  • Household
  • Aerospace
  • Electronic & Telecomm
  • Technical Moulding